Manufacturer of the
worlds largest range
of Lighting Towers
  • Over 10,000 units sold
  • UK 'Industry Standard' for rental
  • Vertical Hydraulic mast
  • Light coverage 4200m2 @ 20lux
  • VT-1 Eco - Automatically switches lamps on/off during the night time
    and day time
  • Fuel Saving Labour Saving
  • Reduced Carbon Footprint
Used in all industry sectors
  • Construction
  • Events
  • Building
  • Ports
  • Roadworks
  • Airports
  • Rail (Network Rail Approved)
  • Film making
  • Quarries
  • Technical
  1. Features & Benefits
  2. Illuminated areas
  3. Dimensions
  • Starts automatically when it goes dark (VT-1 Eco only)
  • 10kva Generator
  • 9 metre hydraulic galvanised mast
  • Fully adjustable stabilisers for safe erection and continuous use.
  • 360° turntable - for safe lighting coverage
  • Simple to operate, all controls are easily accessible and secured away from unauthorised access.
  • A hydraulic security valve is fitted- meaning that the mast can be safely lowered if the engine fails or the battery is stolen.
  • VT-1 & VT-1 Eco is fully bunded for all oil and water.
  • 4 stabilizers - adjustable in height
  • 30% less  emissions, 30% less fuel usage, 4500m2 light coverage at a minimum
    20  lux. (VT-1 Eco only)

Lighting footprint calculation
VT-1 Eco 9m 4x1000W MH
Area 4200 Mq - 20 Lux average
Superlight VT1 footprint chart

Lighting foot print Lux levels

Lux level 5
Lux level 20
Lux level 50
Lux level 100
Lux level 200

VT-1 Eco9m
4x1000W HL - 1600 Mq

Activity Typical types of construction* Minimum
Brightness
in lux
Movement of people, machines and vehicles (a) Driving, general pedestrian movement, unloading equipment or supplies. 5
Movement of people, machines and vehicles in hazardous areas;
rough work not requiring any perception of detail
Less detailed carpentry, concrete pouring. 20
Work requiring limited perception of detail (b) Brick laying, carpet laying, slab levelling, drain laying, roofing, scaffolding. 50
Work requiring perception of detail (b) Electrical work, fine detail carpentry, plumbing, surveying, tiling. 100
Work requiring perception of fine detail (b) Viewing site plans, fine detail electrical work, fine finishing of plastering. 200
  • Only safety has been considered, because no perception of detail is needed and visual fatigue is unlikely.
    However, where it is necessary to see detail to recognise a hazard or where error in performing the task could put someone else at risk, for safety purposes as well as to avoid visual fatigue, the figure needs to be increased to that for work requiring the perception of detail.
    The CIBSE (Code for interior lighting) gives more information and recommendation based on scientific knowledge, practical experience, technical feasibility and economic reality.
  • The purpose is to avoid fatigue; the illuminances will be adequate for safety purposes.
  • The purpose is to avoid fatigue; the illuminances will be adequate for safety purposes.
  • The purpose is to avoid fatigue; the illuminances will be adequate for safety purposes.

Model: VT-1 Superlight & VT-1 Eco 9m HL

Floodlights: 4X1000W halogen

Close dimension: 3400 x1550 x 2330mm

Open dimension:LxWxH 3400 x1850 x 2000mm

Weight: 1115Kg

Fuel Tank capacity: 116 litres

Single phase voltage: 10kVA - 240V

Engine Type: Kubota Diesel D1105

Power: 13,7HP

RPM: 1500

Noise Level: 88 Lwa

 

Dust-Fighter Scoops top awardComing soon

PROUD TO BE THE LEADERS IN LIGHTING TOWERS IN THE UK